Update Samsung Galaxy Note 4 SM-N910R4 to Android 5.0.2 Lollipop N910R4USC1BOC4

Samsung-Galaxy-Note-4-Android-Marshmallow-681x383

Advertisement

Today we will let you know how to update the Samsung Galaxy Note 4 N910R4 the U.S Cellular variant of the phone to the latest release Android 5.0.2 Lollipop build N910R4USC1BOC4. You can follow the instructions given below in this guide and update your device to the latest version of Android available.

If you are using the stock TouchWiz version installed on your device, and you still didn’t rolled out some experiments with your device, like Rooting/ Flashing any new firmware, then for this Samsung GALAXY Note 4 SM-N910R4 variant, you would likely to get the update notification being shown on your notification bar.

Now if you have a rooted device or you have flashed some new firmware on your Galaxy GALAXY Note 4, then you may need to flash this Android 5.0.2 update build USC1BOC4 manually. And for doing it manually we are here to guide you through. All you have to do is follow up these instructions given below.

Pre- Requesties:

Make sure to Charge the smartphone at least 80%.

Download these required files:

1- Android 5.0.2 Lollipop firmware : Link

2- Android USB Drivers : Link

3- ODIN v3.10.7 : Link

Note: This firmware update will only apply on the Above given variant of the Samsung smartphone. So if you have a device with some other model number, DON’T EVEN THINK ABOUT FLASHING.

How to Install Android 5.0.2 N910R4USC1BOC4 firmware on Samsung Galaxy Note 4 SM-N920C :

Follow these steps carefully and at your Own risk.

1- Take a backup of any data that you might need in case you later need to do a factory reset. This includes any data you might have on your internal SD card.

2- Download the ROM’s package and extract the contents of the downloaded zip file to your computer.

3- Download and install Samsung USB drivers, if they aren’t already installed.

4- Power your phone off and boot it into download mode by holding Home and Volume-down buttons while powering it back on.

5- Launch Odin on your computer and connect your phone to it via USB. You should get a blue indicator sign on Odin.

6- Click ‘PDA’ in Odin and select the *.tar.md5 extension file.

7- Leave everything as it is, and especially make sure that Repartition is unchecked.

8- Click ‘Start’ to begin flashing, and wait for the process to finish.

9- Once done Your device will reboot automatically.

That’s it. Hope you have successfully updated your Samsung GALAXY Note 4 SM-N910RC to the latest Android 5.0.2 Update which has recently been rolled out for your device.

If you face any issue while Flashing this update on your device you can simply comment below or send us a message on our Facebook, Twitter or Google+ profiles and we will try to assist you even better.

Advertisement

Comments

comments

Be the first to comment

Leave a Reply

Copy Protected by Chetan's WP-Copyprotect.