0xc000000d Boot Loop on Windows 11 After an Update: Free Step Generator With Recovery Commands

Error 0xc000000d on a blue Recovery screen means Windows 11 could not read the data it needs to start. When it appears straight after an update, the PC usually restarts into Automatic Repair again and again. This free step generator gives you the recovery steps for your PC, in order, with the exact commands to type.

Reports of this loop followed the October 2026 update KB5127648, with the Recovery screen naming winload.efi on some PCs. Microsoft has not confirmed a single cause. The fix that works most often is to remove the latest update from the Windows Recovery Environment, which does not touch your files. Before you start, find your BitLocker recovery key if the drive is encrypted. The guide below shows where to get it and walks through every method.

0xc000000d boot loop fixer for Windows 11
0xc000000d boot loop recovery steps for Windows 11.

How to Use the 0xc000000d Step Generator

Open this page on a phone or a second computer, since the affected PC cannot start. The generator orders the steps for you.

  1. What you see. An Automatic Repair loop, a blue Recovery screen with 0xc000000d, or a winload.efi message.
  2. BitLocker. If the drive is encrypted, the recovery key comes first. Without it you can be locked out part-way.
  3. PC brand. Adds the Intel TXT step reported on Dell PCs.
  4. What you have tried. Skips methods that have already failed.
0xc000000d boot loop chart of recovery steps
Recovery steps for a 0xc000000d boot loop.

What 0xc000000d Means

The code 0xc000000d is a Windows status value meaning an invalid parameter. On the Recovery screen it appears when the boot manager cannot use the boot configuration or cannot load a file it needs, such as winload.efi. The screen usually reads “Your PC/Device needs to be repaired”.

What the screen showsWhat it usually meansStart with
Automatic Repair, repeatingAn update did not finish applyingUninstall latest quality update
0xc000000d, boot configuration dataBoot settings are unreadableUninstall the update, then Startup Repair
0xc000000d, winload.efiThe boot loader failed to loadUninstall the update, then DISM RevertPendingActions
Starts on some attemptsAn intermittent boot-stage faultBack up files, then uninstall the update

After the October 13, 2026 update KB5127648 for Windows 11 24H2, 25H2 and 26H2, users and IT administrators reported exactly this loop. Microsoft has not published a cause or a universal fix for it. The methods below are the standard recovery route and apply to any update that leaves a PC in this state.

Before You Start: Your BitLocker Recovery Key

Many Windows 11 PCs have device encryption turned on from the factory. The recovery tools will ask for the 48-digit key before they let you change anything.

  1. On a phone or another PC, sign in to your Microsoft account.
  2. Open Devices and select the affected PC.
  3. Select Manage recovery keys or BitLocker recovery keys.
  4. Match the Key ID shown on the PC’s screen and write down the 48-digit recovery key.
Where the key may beApplies to
Your Microsoft accountMost home PCs set up with a Microsoft account
Your work or school accountPCs joined to an organisation
A printout or USB driveIf you saved it when BitLocker was turned on
Your IT departmentManaged PCs

If you cannot find the key, stop before the Command Prompt and reset steps. You can still try Uninstall Updates, which often accepts your account password instead.

Method 1: Uninstall the Latest Quality Update

  1. Turn the PC on. When the maker’s logo or the Windows logo appears, hold the power button for 5 to 7 seconds until it turns off.
  2. Repeat until you have interrupted three starts. On the next start the screen shows Preparing Automatic Repair.
  3. Select Advanced options.
  4. Select Troubleshoot, then Advanced options, then Uninstall Updates.
  5. Enter your password if asked, and select Continue.
  6. Choose Uninstall latest quality update and confirm.
  7. Enter the BitLocker recovery key if asked.
  8. When it finishes, select Done, then Continue to start Windows.

This removes only the most recent monthly update. Your files, apps and settings stay as they were. It takes a few minutes and is the method that works most often.

Method 2: Revert Pending Actions With DISM

If the uninstall reports an error, the update may be half-applied. DISM can cancel the unfinished part.

  1. Open the recovery menu again, as in Method 1.
  2. Select Troubleshoot, Advanced options, Command Prompt.
  3. Type bcdedit and press Enter. Under Windows Boot Loader, read the drive letter after osdevice.
  4. Run the DISM command below, changing C: if your drive letter is different.
  5. Wait for it to finish, close the window and select Continue.
bcdedit
DISM /Image:C:\ /Cleanup-Image /RevertPendingActions

The first start after this is slow, because Windows is undoing changes. Let it run and do not turn the PC off.

0xc000000d boot loop chart of recovery menu paths
Where each tool is in the Windows recovery menu.

Method 3: Intel TXT on Dell PCs

Some Dell owners have reported that the PC starts once Intel Trusted Execution Technology is switched off in the BIOS. Neither Dell nor Microsoft has confirmed this, and it does not work on every PC. Try it only if Methods 1 and 2 failed.

  1. Have your BitLocker recovery key ready. A BIOS change can trigger a request for it.
  2. Restart and press F2 repeatedly to open BIOS Setup.
  3. Look under Virtualization Support for Intel Trusted Execution Technology (TXT). The location varies by model.
  4. Turn it off, save and restart.
  5. If Windows starts, install pending updates, then return to the BIOS and turn Intel TXT back on.

Method 4: Startup Repair, System Restore and Reset

ToolPath in the recovery menuWhat it doesKeeps your files
Startup RepairTroubleshoot, Advanced options, Startup RepairRebuilds boot files automaticallyYes
System RestoreTroubleshoot, Advanced options, System RestoreReturns system files to an earlier dateYes
Uninstall latest feature updateTroubleshoot, Advanced options, Uninstall UpdatesGoes back to the previous Windows versionYes
Reset this PC, Keep my filesTroubleshoot, Reset this PCReinstalls Windows and removes appsYes, files only
Reset this PC, Remove everythingTroubleshoot, Reset this PCWipes the driveNo

How much each recovery step changes

Try them from top to bottom

Uninstall quality updateOne update removed
DISM revertUnfinished changes cancelled
Startup RepairBoot files rebuilt
System RestoreSystem files rolled back
Reset, keep filesApps removed
Reset, remove everythingDrive wiped

If none of these work, the drive may be failing. Copy your files off it from the recovery Command Prompt or by connecting the drive to another PC before you do anything more drastic.

After Windows Starts Again

  1. Open Settings, Windows Update and select Pause updates for one week.
  2. Back up your important files to an external drive or cloud storage.
  3. Run DISM /Online /Cleanup-Image /RestoreHealth and then sfc /scannow in an administrator Command Prompt.
  4. Update the BIOS and chipset drivers from your PC maker’s support page.
  5. After the pause ends, let Windows Update install the newest update, which may include a fix.

If the next update then refuses to install, the KB5132061 fixer covers install errors.

0xc000000d boot loop chart of BitLocker key locations
Where to find a BitLocker recovery key.
0xc000000d boot loop chart of what to do afterwards
What to do once Windows starts again.

About Windows 11

Windows 11 starts through the Windows Boot Manager, which reads the Boot Configuration Data and loads winload.efi. If any of those steps fails, the PC opens the Windows Recovery Environment, known as WinRE.

BitLocker and Device Encryption protect the drive with a 48-digit recovery key, stored in the owner's Microsoft account or with an organisation. Microsoft releases cumulative quality updates for Windows 11 every month.

The 0xc000000d boot loop fixer on this page is free to use, and we update it when the game changes its numbers.

Official page: Microsoft Support, Windows Recovery Environment.

If this 0xc000000d boot loop fixer helped, these free tools work the same way.

New this month: KB5132061 install error fixer, Windows 11 version checker, nvlddmkm Event ID 153 diagnoser, EmuDeck Ryujinx crash fixer.

Frequently Asked Questions

Quick answers about Windows 11 and the 0xc000000d boot loop fixer.

What is error 0xc000000d?

A Windows status code meaning an invalid parameter. On the Recovery screen it means the boot manager could not read its configuration or load a file such as winload.efi.

How do I fix a 0xc000000d boot loop?

Open the Windows Recovery Environment by interrupting startup three times, then choose Troubleshoot, Advanced options, Uninstall Updates, Uninstall latest quality update.

Will I lose my files?

Not with the first methods. Uninstalling an update, DISM, Startup Repair and System Restore all keep your files. Only Reset this PC with Remove everything deletes them.

Do I need my BitLocker key?

Probably. Most Windows 11 laptops are encrypted by default, and recovery tools ask for the 48-digit key. Find it in your Microsoft account under Devices.

Which update causes 0xc000000d?

Reports followed the October 2026 update KB5127648. Microsoft has not confirmed a cause, and other updates can leave a PC in the same state.

How do I open the recovery environment when Windows will not start?

Turn the PC on and hold the power button to switch it off as soon as the logo appears. After three interrupted starts, Windows opens Automatic Repair.

Should I download winload.efi from the internet?

No. Never download boot or driver files from third-party sites. Use the built-in recovery tools, which restore the correct files.

Is the 0xc000000d step generator free?

Yes. It runs in your browser and needs no sign-up.

More Games You May Like

Leave a Reply

Your email address will not be published. Required fields are marked *