KB5132061 Not Installing or Stuck at 99%? Free Fixer for 0x800f0993, 0x80070306 and 0x800f0989

KB5132061 is the November 2026 security update for Windows 11, released on November 10. On many PCs it downloads, installs to 99 percent and then fails with error 0x800f0993, 0x80070306, 0x800f0989 or 0x800f0922, and Windows Update tries again on the next restart. This free fixer gives you the steps to try, in order, with the commands ready to copy.

As of November 18, 2026, Microsoft’s support page for the update still lists no known issues, so there is no official cause or fix. What follows are the workarounds that users and Windows reporters have found to work, starting with the quickest and least risky. Pick your error code and what you have already tried, and the tool skips what you have done. None of these steps removes your files.

KB5132061 install error fixer for Windows 11
KB5132061 install errors and the order to try the fixes.

How to Use the KB5132061 Fixer

The fixer builds a list for your situation, so you do not repeat steps that have already failed.

  1. What happens. Pick the error code Windows Update shows, or “Stuck at 99 percent”.
  2. Windows Sandbox. One reported trigger. If you do not know, the tool shows you how to check.
  3. What you have tried. Earlier steps are removed from the list.
  4. Version and owner. Sets the right download, and stops you changing a managed work PC.

Find the error code under Settings, Windows Update, Update history, next to the failed entry for KB5132061.

KB5132061 chart of install error codes
The error codes reported with KB5132061.

What Is KB5132061 and What Is Going Wrong

DetailKB5132061
TypeMonthly security update (Patch Tuesday)
ReleasedNovember 10, 2026
Applies toWindows 11 24H2, 25H2 and 26H2
Builds reported26200.9974 for 25H2 and 26300.9974 for 26H2
Reported errors0x800f0993, 0x80070306, 0x800f0989, 0x800f0922
Reported symptomInstalls to 99 percent, fails, rolls back, retries
Microsoft’s statusNo known issues listed as of November 18, 2026

The failure has been reported widely since release day, including on Microsoft’s own community forum. The cause is not confirmed. One line of reporting connects it to the Windows Sandbox feature, and some users with Sandbox turned off have seen the same error, so that is at best one trigger among several. Other reports point to PCs that installed the optional October preview update. Until Microsoft says more, treat every explanation as provisional.

ErrorWhat users reportFirst thing to try
Stuck at 99 percentFails at the last stage and rolls backTurn off Windows Sandbox
0x800f0993The most common codeTurn off Windows Sandbox, then the Update Catalog
0x80070306Fails repeatedly, sometimes ten times or moreUpdate Catalog, then the component reset
0x800f0989Seen alongside 0x800f0993DISM and SFC
0x800f0922Final-stage failureDisconnect any VPN, then DISM and SFC

Fix 1: Turn Off Windows Sandbox

This is the quickest fix to test and it is fully reversible. Windows Sandbox is an optional feature that is off by default on most home PCs.

  1. Press Windows + R, type optionalfeatures and press Enter.
  2. Scroll to Windows Sandbox. If the box is empty, it is already off: move to Fix 2.
  3. If it is ticked, untick it and select OK.
  4. Restart when asked.
  5. Open Settings, Windows Update and select Retry.
  6. Once KB5132061 is installed, you can tick Windows Sandbox again.

To do the same from an administrator Command Prompt:

Dism /Online /Disable-Feature /FeatureName:Containers-DisposableClientVM /NoRestart

Fix 2: Install KB5132061 From the Microsoft Update Catalog

A manual install skips the Windows Update download and uses a standalone package.

  1. Check your version: press Windows + R, type winver and press Enter. Note 24H2, 25H2 or 26H2.
  2. Check your processor type: Settings, System, About, System type. Most PCs are x64. Snapdragon PCs are ARM64.
  3. Open the Microsoft Update Catalog in your browser and search for KB5132061.
  4. Find the row that matches your version and processor type and select Download.
  5. Run the downloaded .msu file and follow the prompts.
  6. Restart.

Some users report the manual install fails with the same code. If it does, continue to the next fix. Only download update packages from Microsoft’s own catalog.

Fix 3: Reset the Windows Update Components

This clears the update download cache, which removes a damaged copy of the update.

  1. Select Start, type cmd, right-click Command Prompt and choose Run as administrator.
  2. Run these commands one line at a time:
net stop wuauserv
net stop cryptsvc
net stop bits
rd /s /q "%windir%\SoftwareDistribution"
rd /s /q "%windir%\System32\catroot2"
net start wuauserv
net start cryptsvc
net start bits
  1. Restart the PC.
  2. Open Settings, Windows Update and select Check for updates.

The two folders are rebuilt automatically. Your update history list will be empty afterwards, which is expected. Installed updates are not removed.

Fix 4: Repair System Files With DISM and SFC

If a system file the update needs is damaged, these two tools repair it from Microsoft’s servers.

DISM /Online /Cleanup-Image /RestoreHealth
sfc /scannow
CommandWhat it doesTime
DISM /Online /Cleanup-Image /RestoreHealthRepairs the Windows component store10 to 30 minutes
sfc /scannowChecks and replaces damaged system files5 to 15 minutes

Run DISM first, then SFC, in an administrator Command Prompt. DISM can sit at 62 percent for several minutes, which is normal. Restart and retry the update when both have finished. At least one user reported that the update installed only after this step.

KB5132061 chart of fixes in order
The order to try KB5132061 fixes.

Fix 5: Reinstall Windows 11 Over Itself

Windows 11 can reinstall its current version from Windows Update without touching your apps, files or settings. It replaces every system file, which clears most servicing problems.

  1. Open Settings, System, Recovery.
  2. Next to Fix problems using Windows Update, select Reinstall now.
  3. Confirm, and leave the PC plugged in. It downloads the current build and restarts.
  4. When it finishes, open Windows Update and check for updates.

Back up anything important first, as you should before any repair. This is the last practical step short of waiting for Microsoft.

Should You Wait Instead?

Your situationWhat to do
Home PC, the error does not bother youPause updates for a week and try again
PC keeps restarting to retry the updatePause updates so it stops, then work through the fixes
Work or school PCReport it to IT. Do not change features or reinstall
You need the security fixes nowWork through the fixes above in order

How intrusive each fix is

From a quick setting to a full reinstall of system files

RetryOne click
Turn off SandboxReversible setting
Update CatalogManual download
Component resetClears the update cache
DISM and SFCRepairs system files
Reinstall nowReplaces Windows files

If the update leaves the PC unable to start at all, that is a different problem. See the 0xc000000d boot loop fix. To check which Windows 11 version you should be on, see Windows 11 26H1 vs 25H2.

KB5132061 chart of what to do by situation
Whether to fix KB5132061 now or wait.
KB5132061 chart of commands
Commands used to repair Windows Update.

About Windows 11

KB5132061 is a cumulative security update that Microsoft released for Windows 11 on November 10, 2026, as part of its monthly Patch Tuesday cycle. It applies to versions 24H2, 25H2 and 26H2.

Windows Update, the Microsoft Update Catalog, Deployment Image Servicing and Management (DISM) and System File Checker (SFC) are the Windows tools used to install and repair updates.

The KB5132061 install error fixer on this page is free to use, and we update it when the game changes its numbers.

Official page: Microsoft Support, troubleshoot problems updating Windows.

If this KB5132061 install error fixer helped, these free tools work the same way.

New this month: 0xc000000d boot loop fixer, Windows 11 version checker, nvlddmkm Event ID 153 diagnoser, EmuDeck Ryujinx crash fixer.

Frequently Asked Questions

Quick answers about Windows 11 and the KB5132061 install error fixer.

Why is KB5132061 not installing?

The cause is not confirmed. Microsoft lists no known issues as of November 18, 2026. Reports link some failures to Windows Sandbox and to PCs with the October preview update.

How do I fix KB5132061 stuck at 99 percent?

Turn off Windows Sandbox in Windows Features and retry. If that fails, install the update from the Microsoft Update Catalog, then reset the Windows Update components and run DISM and SFC.

What is error 0x800f0993?

It is the most commonly reported failure code for KB5132061. Microsoft has not documented a specific cause for it with this update.

Is it safe to skip KB5132061?

For a few days, yes. It is a security update, so do not leave it uninstalled for long. Pause updates for a week at most.

Will these fixes delete my files?

No. None of them removes personal files. Reinstall now also keeps your apps and settings.

Has Microsoft fixed KB5132061?

Not as of November 18, 2026. Check Windows Update again after a few days, as Microsoft sometimes reissues an update.

Can I uninstall KB5132061?

If it failed, there is nothing to uninstall: Windows rolls it back automatically. If it installed and causes problems, remove it under Settings, Windows Update, Update history, Uninstall updates.

Is the KB5132061 fixer free?

Yes. It runs in your browser and needs no sign-up.

More Games You May Like

Leave a Reply

Your email address will not be published. Required fields are marked *