How to Fix Recording Lag in Minecraft: Free OBS Settings Generator by GPU

Here is how to fix recording lag in Minecraft: use your graphics card’s hardware encoder, cap the game’s frame rate, and capture the game the right way. This free generator builds the full set of OBS Studio settings for your GPU, resolution and frame rate, along with the Minecraft video settings that go with them.

Recording lag comes in two forms. Either the game runs slowly while you record, or the game feels fine and the saved video is choppy. They have different causes, and OBS Studio tells you which one you have on its Stats panel. The guide below shows how to read that panel and fix both, for Minecraft: Java Edition and Bedrock Edition on Windows 11 and Windows 10.

Minecraft recording settings generator for Minecraft
How to fix recording lag in Minecraft: hardware encoder, frame cap and the right capture source.

How to Fix Recording Lag in Minecraft With the Generator

The generator answers how to fix recording lag in Minecraft for your exact hardware. Seven choices produce five lists: OBS output, OBS video, the capture source, Minecraft settings and Windows settings.

  1. Graphics card. Decides the encoder. This is the most important answer.
  2. Resolution and frame rate. What the saved video will be. 1080p at 60 FPS suits almost every use.
  3. What matters most. Sets the quality value: 16 for editing, 20 balanced, 24 for small files.
  4. Edition. Java and Bedrock have different window names and different video menus.
  5. Mods and shaders. Change the frame cap and render distance.
  6. Recording drive. Adds advice if the drive could be the limit.

Enter the lists in order, record one minute, and check the Stats panel as described below.

How to fix recording lag in Minecraft chart of OBS encoders by GPU
Which OBS encoder to use for each graphics card.

Two Kinds of Recording Lag, and How to Tell Them Apart

Open OBS Studio, choose View, then Docks, then Stats. Record for a minute while you play and read two lines.

Stats lineMeaningCauseFix
Frames missed due to rendering lagOBS could not draw its own preview in timeThe GPU is at 100 percent from the gameCap Minecraft’s frame rate, run OBS as administrator
Skipped frames due to encoding lagThe encoder could not keep upCPU encoder too slow, or preset too heavySwitch to a hardware encoder, use a faster preset
Both at 0 percent, video still choppyFrame rates do not divide evenlyGame runs at an odd rate against the recordingCap the game at 2 times the recording frame rate
Both at 0 percent, game itself is slowNot a recording problemThe PC cannot run the game and recordLower render distance, add performance mods

Anything above 1 percent on either line is visible in the video. These two numbers tell you which half of this guide to read.

How to fix recording lag in Minecraft chart of OBS Stats readings
How to read the OBS Stats panel.

How to Fix Recording Lag in Minecraft: Pick the Right Encoder

The encoder turns frames into a video file. The single biggest step in how to fix recording lag in Minecraft is moving that work from the processor to the graphics card. Minecraft: Java Edition leans hard on the CPU, so encoding with x264 on the same CPU takes frames away from the game.

Graphics cardVideo Encoder in OBSRate ControlQuality valuePreset
NVIDIA GeForce RTX, GTX 16 seriesNVIDIA NVENC H.264CQP20P5: Slow (Good Quality)
Older NVIDIA GeForce GTXNVIDIA NVENC H.264CQP20P4: Medium
AMD RadeonAMD HW H.264 (AVC)CQP20Quality
Intel ArcQuickSync H.264ICQ20Balanced
Integrated graphicsQuickSync H.264 or AMD HW H.264ICQ or CQP20 to 23Speed
None availablex264CRF20 to 23veryfast
  1. In OBS Studio open Settings, then Output.
  2. Set Output Mode to Advanced.
  3. Open the Recording tab.
  4. Set Video Encoder to the entry for your card from the table.
  5. Set Rate Control to CQP and the quality value to 20.
  6. Set Recording Format to Matroska Video (.mkv). An MKV file survives a crash. Convert it afterwards with File, Remux Recordings.

Use CQP, ICQ or CRF for recording, never CBR. Those modes hold quality steady and let the bitrate move, which suits Minecraft: a cave needs little data and a jungle at speed needs a lot.

Quality value against file size

NVENC CQP at 1080p and 60 FPS, approximate

CQP 16about 16 GB per hour
CQP 18about 12 GB per hour
CQP 20about 10 GB per hour
CQP 23about 7 GB per hour
CQP 26about 5 GB per hour

Lower numbers mean better quality and larger files. For video you will upload, 20 is the practical choice. Below 16 the file grows quickly and the picture does not visibly improve.

Cap Minecraft's Frame Rate While Recording

An uncapped Minecraft will happily run at 400 FPS and hold the graphics card at 100 percent. OBS then has no GPU time to compose its own frames, and you get rendering lag. A cap fixes it.

Recording frame rateCap Minecraft atWhy
30 FPS60 FPSTwice the recording rate, so every recorded frame is fresh
60 FPS120 FPSSame reason. Use 60 on a weak PC
120 FPS240 FPS, or 120 on mid-range PCsHigh frame rate recording needs a strong GPU
  1. In Minecraft: Java Edition open Options, then Video Settings.
  2. Drag Max Framerate to the value from the table.
  3. Set VSync to OFF.
  4. In Bedrock Edition, open Settings, then Video, and set Max Framerate.

A cap that is an exact multiple of the recording frame rate also removes the uneven motion you get when, for example, a 144 FPS game is recorded at 60.

How to fix recording lag in Minecraft chart of frame rate caps
Frame rate cap for each recording frame rate.

Capture Minecraft the Right Way in OBS

The capture source decides how OBS reads the game’s picture. The wrong one costs frames or records a black screen.

SourceUse it forPerformanceNotes
Game CaptureMinecraft, first choiceBestReads frames straight from the game
Window CaptureWhen Game Capture is blackGoodSet Capture Method to Windows 10 (1903 and up)
Display CaptureLast resortLowestRecords the whole screen, including notifications
  1. Start Minecraft first.
  2. In OBS, click + under Sources and choose Game Capture.
  3. Set Mode to Capture specific window.
  4. Choose [javaw.exe]: Minecraft for Java Edition.
  5. If the preview is black, close OBS and start it again with Run as administrator.
  6. If it is still black, remove the source and use Window Capture.

Running OBS as administrator does a second job as well. It lets Windows give OBS priority on the graphics card, which directly reduces rendering lag when the game is using most of the GPU.

Minecraft Settings That Leave Room for Recording

Recording needs headroom. These are the Minecraft settings to lower while you record, in order of how much they free up.

SettingWhile recordingLoadsEffect on the video
Render Distance8 to 12 chunksCPU and GPULess far terrain. Barely visible in most footage
Simulation Distance6 to 8 chunksCPUNone on the picture
ShadersA lighter profile, or offGPU, heavilyLarge. Decide if the look is worth the frames
GraphicsFancy, or Fast on weak PCsGPULeaves and clouds
Entity ShadowsOFFGPUSmall
ParticlesDecreasedCPUSmall
Biome Blend3 x 3 or lowerCPUVery small
Mipmap Levels2GPU memoryVery small

On Java Edition, a performance mod such as Sodium, used with the Fabric loader, changes the renderer and often doubles the frame rate with the same picture. If Minecraft itself struggles to hold 60 FPS, that is the place to start, before any OBS setting.

Recording Drive, Resolution and Scaling

  • Drive. A CQP 20 recording at 1080p and 60 FPS writes about 3 MB per second. Any SSD and most hard drives manage that. If the video hitches when the world loads new chunks, the game and the recording are competing for one drive, so record to a second one.
  • Free space. Keep at least 20 GB free before a long session. OBS stops recording when the drive fills.
  • Resolution. Set Base (Canvas) Resolution to your monitor’s resolution and Output (Scaled) Resolution to what you want saved. Recording a 1440p screen at 1080p cuts the encoder’s work by almost half.
  • Frame rate. Common FPS Values of 60 suits gameplay. 30 halves the load and is enough for building timelapses and tutorials.
  • Preview. Right-click the OBS preview and untick Enable Preview while recording. It saves a little GPU time.

Encoder workload by recording resolution and frame rate

Pixels per second, relative to 1080p at 60 FPS

1080p, 30 FPS0.5 times
1080p, 60 FPS1 time
1440p, 60 FPS1.8 times
1080p, 120 FPS2 times
4K, 60 FPS4 times
How to fix recording lag in Minecraft chart of OBS recording settings
OBS recording settings for Minecraft in short.

How to Fix Recording Lag in Minecraft: Worked Example

Here is how to fix recording lag in Minecraft in a common case. A player with an NVIDIA GeForce RTX card records with the x264 encoder, an uncapped frame rate and Display Capture. The game drops from 300 to 70 FPS and the video stutters. The Stats panel shows 9 percent of frames missed to rendering lag. They choose “NVIDIA GeForce RTX”, 1080p and 60 FPS in the generator, switch to NVIDIA NVENC H.264 at CQP 20, add a Game Capture source, run OBS as administrator and cap Minecraft at 120 FPS. The game holds 120, both Stats lines read 0 percent, and an hour of footage takes about 10 GB.

About Minecraft

Minecraft is a sandbox game developed by Mojang Studios, part of Microsoft. Java Edition runs on Windows, macOS and Linux, and Bedrock Edition runs on Windows, consoles and mobile devices.

OBS Studio is free, open-source recording and streaming software from the OBS Project. It supports hardware encoders including NVIDIA NVENC, AMD Advanced Media Framework and Intel Quick Sync Video, and saves recordings in formats such as MKV and MP4.

The Minecraft recording settings generator on this page is free to use, and we update it when the game changes its numbers.

Official page: OBS Studio Knowledge Base, the official documentation.

If this Minecraft recording settings generator helped, these free tools work the same way.

New this month: FPS drop fixer, Marvel Rivals lag fixer, Discord lag fixer, Minecraft server lag calculator.

Frequently Asked Questions

Quick answers about Minecraft and the Minecraft recording settings generator.

How do I fix recording lag in Minecraft?

Use a hardware encoder such as NVIDIA NVENC in OBS Studio with CQP 20, capture with Game Capture, run OBS as administrator, and cap Minecraft at twice your recording frame rate.

Why does Minecraft lag when I record?

Either the CPU is encoding the video while also running the game, or the game is uncapped and using the whole graphics card, which leaves nothing for the recorder.

What are the best OBS settings for recording Minecraft?

Output Mode Advanced, a hardware encoder, CQP 20, 1920 x 1080 at 60 FPS, MKV format and a Game Capture source.

Should I use NVENC or x264 for Minecraft?

NVENC, or the AMD or Intel hardware encoder. Minecraft: Java Edition is CPU-heavy, so the x264 CPU encoder takes performance from the game.

What FPS should I cap Minecraft at for recording?

Twice the recording frame rate: 120 FPS for a 60 FPS video and 60 FPS for a 30 FPS video.

Why is my Minecraft recording choppy but the game is smooth?

Open View, Docks, Stats in OBS. Missed frames from rendering lag mean the GPU is full, so cap the game. Skipped frames from encoding lag mean the encoder is too slow.

How much space does an hour of Minecraft recording take?

About 10 GB at 1080p and 60 FPS with CQP 20, about 16 GB at CQP 16 and about 7 GB at CQP 23.

Is the Minecraft recording settings generator free?

Yes. It runs in your browser and needs no sign-up.

More Games You May Like

Leave a Reply

Your email address will not be published. Required fields are marked *