DLSS vs FSR Frame Generation: Free Checker Tells You Whether to Turn It On (With Input Lag Cost)
The DLSS vs FSR frame generation question has a short answer and a more useful one. The short answer: DLSS Frame Generation looks better and adds less delay, and FSR Frame Generation runs on far more graphics cards. The useful answer depends on your own frame rate, which is what this free checker works out.
Enter your graphics card, the frame rate you get before frame generation, your monitor’s refresh rate and the kind of game. The checker tells you whether to turn frame generation on, which version your card can run, the frame rate you will see, and roughly how much input delay it adds. The guide below compares NVIDIA DLSS, AMD FSR and Intel XeSS frame generation in full.

Table of Contents
How to Use the DLSS vs FSR Frame Generation Checker
The checker settles the DLSS vs FSR frame generation question for your own PC with five inputs.
- Graphics card. Decides which frame generation you can run at all. DLSS Frame Generation needs a GeForce RTX 40 or 50 series card.
- Frame rate before frame generation. The most important number. Turn frame generation off, play a busy scene and read the counter.
- Refresh rate. Generated frames above your refresh rate are wasted, so this sets the ceiling.
- Type of game. Slow games and controller games tolerate delay. Competitive games do not.
- VRAM. Adds a warning if memory is likely to run short.
The result gives a verdict, the frame rate you will see, the real frame rate underneath it, and the delay it adds.

DLSS vs FSR Frame Generation: The Comparison
| DLSS Frame Generation | FSR Frame Generation | XeSS Frame Generation | |
|---|---|---|---|
| From | NVIDIA | AMD | Intel |
| Graphics cards | GeForce RTX 40 and 50 series | Radeon RX 5000 and newer, and most NVIDIA and Intel cards | Intel Arc |
| Method | Machine learning | Machine learning on RX 9000, analytical on other cards | Machine learning |
| Frames added | 1 per real frame. More on RTX 50 with Multi Frame Generation | 1 per real frame | 1 per real frame |
| Low-latency partner | NVIDIA Reflex | Radeon Anti-Lag 2 | Xe Low Latency |
| Image quality in motion | Best | Good on RX 9000, more artifacts on older cards | Good |
| Works with other upscalers | In some games | Yes, in most games | In some games |
| Biggest strength | Quality and low delay | Runs on almost anything | Good on Arc |
| Biggest weakness | Needs a recent RTX card | Quality varies by card and version | Fewer supported games |
In independent testing through 2026, DLSS Frame Generation has kept a lead in both image quality and delay. The machine-learning version of FSR Frame Generation, released with the FSR “Redstone” update in December 2025 for Radeon RX 9000 cards, closed much of the gap in image quality. On older Radeon and GeForce cards, FSR uses its earlier analytical method, which shows more ghosting around the interface and fast objects.
What Frame Generation Does
Frame generation does not make the game run faster. The graphics card draws two real frames, and the technique creates one or more extra frames to show between them. Motion looks smoother because more pictures reach the screen each second.
- The game still reads your mouse and controller at the real frame rate.
- To place a generated frame between two real ones, the newest real frame has to be held back briefly. That is the added delay.
- Generating frames takes some GPU time, so the real frame rate falls by roughly 10 percent when you turn it on.
- The result: the picture is smoother than before, and the controls feel slightly slower than before.
What happens to 60 FPS when frame generation is on
Approximate, at a 2x multiplier
This is the reason the frame rate counter cannot be trusted with frame generation on. A game showing 108 FPS responds like a game running at 54.
Which Graphics Cards Support DLSS and FSR Frame Generation
| Graphics card | DLSS Frame Generation | DLSS Multi Frame Generation | FSR Frame Generation | Best choice |
|---|---|---|---|---|
| GeForce RTX 50 series | Yes | Yes | Yes | DLSS Multi Frame Generation |
| GeForce RTX 40 series | Yes | No | Yes | DLSS Frame Generation |
| GeForce RTX 20 and 30 series | No | No | Yes | FSR Frame Generation |
| GeForce GTX | No | No | Yes, on most cards | FSR Frame Generation |
| Radeon RX 9000 series | No | No | Yes, machine-learning version | FSR Frame Generation |
| Radeon RX 5000, 6000 and 7000 series | No | No | Yes, analytical version | FSR Frame Generation |
| Intel Arc | No | No | Yes | XeSS or FSR Frame Generation |
NVIDIA lists DLSS Super Resolution and DLAA for all RTX cards, Frame Generation for the RTX 40 and 50 series, and Multi Frame Generation and Dynamic Multi Frame Generation for the RTX 50 series only. AMD lists machine-learning frame generation for the Radeon RX 9000 series and above, with the earlier version available on Radeon RX 5000 and newer and on equivalent cards from other makers.

The 60 FPS Rule and Input Delay
The most useful rule in the whole DLSS vs FSR frame generation debate has nothing to do with the brand: start from at least 60 real frames per second. AMD gives 60 FPS as the baseline for FSR Frame Generation. NVIDIA publishes no fixed minimum, but the same logic applies.
Extra delay from holding one frame, by base frame rate
One real frame of delay, in milliseconds. Lower is better
| Base frame rate | Verdict | What you will notice |
|---|---|---|
| Under 40 FPS | Do not use it | Smearing around moving objects and a clear lag on every input |
| 40 to 59 FPS | Slow games and controllers only | Smoother picture, slightly heavy aim |
| 60 to 90 FPS | Good | Smooth, with delay most players do not notice in single-player games |
| Over 90 FPS | Best | Very smooth on 165 Hz and 240 Hz screens |
Low frame rates are exactly where people want frame generation, and exactly where it works worst. If your base is under 60 FPS, use an upscaler first. If the frame rate itself is unstable, fix that with the method in how to fix FPS drops.

Multi Frame Generation on RTX 50 Cards
DLSS Multi Frame Generation inserts more than one generated frame between each pair of real ones. It was introduced with DLSS 4 on the GeForce RTX 50 series, and DLSS 4.5 added a dynamic mode that changes the multiplier as the frame rate moves.
| Multiplier | Real frames needed for 240 shown | Feels like | Sensible on |
|---|---|---|---|
| 2x | 120 | 120 FPS | 144 Hz and 165 Hz screens |
| 3x | 80 | 80 FPS | 240 Hz screens |
| 4x | 60 | 60 FPS | 240 Hz screens and above |
A higher multiplier does not make the game more responsive. At 4x, three of every four frames are generated, and the game still reacts at the real rate. Pick the lowest multiplier that fills your refresh rate.
How to Turn Frame Generation On Correctly
DLSS Frame Generation
- Update the graphics driver from the NVIDIA app.
- In the game’s Graphics menu, set the upscaler to DLSS Super Resolution at Quality.
- Turn on DLSS Frame Generation. On an RTX 50 card, choose the multiplier.
- Check that NVIDIA Reflex Low Latency is On. Most games switch it on with frame generation.
- Turn V-Sync off in the game.
- Cap the frame rate 3 below your refresh rate in the NVIDIA app.
FSR Frame Generation
- Update AMD Software: Adrenalin Edition, or the driver for your card.
- In the game’s Graphics menu, set the upscaler to FSR at Quality. Many games require an upscaler or Native AA to be active.
- Turn on FSR Frame Generation.
- Turn on Radeon Anti-Lag 2 if the game lists it. If not, turn on Radeon Anti-Lag in AMD Software.
- Turn V-Sync off in the game and use FreeSync.
- Cap the frame rate 3 below your refresh rate.
| Setting | Set to | Why |
|---|---|---|
| Upscaler | Quality | Raises the real frame rate before frames are generated |
| Reflex or Anti-Lag 2 | On | Removes the render queue, which offsets most of the added delay |
| V-Sync in game | Off | V-Sync adds its own delay on top |
| G-Sync or FreeSync | On | Stops tearing without V-Sync |
| Frame rate cap | 3 below refresh rate | Keeps the frame rate inside the variable refresh range |
Both makers also offer frame generation at the driver level for games with no built-in support: Smooth Motion from NVIDIA and AMD Fluid Motion Frames. They work on the finished image without help from the game, so the interface and fast movement show more errors. Use the in-game option when there is one.
When Not to Use Frame Generation
- Competitive shooters and fighting games. Delay matters more than smoothness, and generated frames carry no new information.
- 60 Hz and 75 Hz monitors. There is no room above the base frame rate for extra frames.
- A base frame rate under 40 FPS. Errors become visible and controls feel slow.
- When video memory is full. Frame generation needs extra VRAM, and running out causes stutter worse than the low frame rate it replaced.
- When frame times are uneven. Generated frames amplify stutter. Fix the stutter first.
- To pass a frame rate target in a benchmark. The number goes up, the experience may not.
For the same reason, game-specific guides such as the Marvel Rivals lag fix tell you to switch it off for ranked play. To choose the upscaler and anti-aliasing that go with it, see the best anti aliasing setting picker.

DLSS vs FSR Frame Generation: Worked Example
Here is the DLSS vs FSR frame generation choice in a typical case. A player has a GeForce RTX 40 series card, a 144 Hz monitor and 70 FPS in a single-player open-world game. The checker returns “Turn it on” with DLSS Frame Generation. The real frame rate settles near 63 FPS, the screen shows about 126, and the added delay is roughly 8 to 16 milliseconds, most of which NVIDIA Reflex removes. The same player in a competitive shooter gets “Leave it off”, whatever the frame rate.
About PC games
Frame generation is a rendering technique that creates extra frames between the ones a graphics card draws. NVIDIA introduced DLSS Frame Generation with DLSS 3 in 2022, and AMD followed with FSR 3 Frame Generation in 2023.
NVIDIA DLSS runs on GeForce RTX graphics cards and uses NVIDIA Reflex to lower latency. AMD FidelityFX Super Resolution (FSR) runs on Radeon and most other cards and pairs with Radeon Anti-Lag 2. Intel XeSS provides frame generation for Intel Arc.
The frame generation checker on this page is free to use, and we update it when the game changes its numbers.
Official page: AMD FSR technologies, the official page.
Related Calculators
If this frame generation checker helped, these free tools work the same way.
- Best anti aliasing setting picker
- Best game settings hub
- How to fix FPS drops
- Marvel Rivals lag fix
- Best Path of Exile 2 settings
- Fix lag and FPS drops hub
- All free gaming and tech calculators
New this month: anti-aliasing setting picker.
Frequently Asked Questions
Quick answers about PC games and the frame generation checker.
Is DLSS or FSR frame generation better?
DLSS Frame Generation has better image quality and lower input delay. FSR Frame Generation runs on far more graphics cards, including Radeon, older GeForce and Intel cards.
Does frame generation cause input lag?
Yes. It holds a real frame back to insert generated ones, which adds roughly half to one frame of delay. NVIDIA Reflex or Radeon Anti-Lag 2 offsets much of it.
What FPS do I need for frame generation?
At least 60 real frames per second for a good result. Between 40 and 59 it is usable in slow games. Below 40, leave it off.
Can I use DLSS Frame Generation on an RTX 30 series card?
No. It needs an RTX 40 or 50 series card. On RTX 20 and 30 cards, use FSR Frame Generation in games that offer it.
Does FSR Frame Generation work on NVIDIA cards?
Yes. The analytical version of FSR Frame Generation runs on most NVIDIA and Intel cards as well as Radeon.
Should I use frame generation in competitive games?
No. It adds delay and the generated frames show nothing new about enemy positions. Use an upscaler and a low-latency mode instead.
What is Multi Frame Generation?
A DLSS feature for RTX 50 series cards that inserts more than one generated frame per real frame. It suits 240 Hz monitors and does not improve responsiveness.
Is the frame generation checker free?
Yes. It runs in your browser and needs no sign-up.
More Game Settings Guides
Every guide starts with a free generator. See them all on the best game settings hub.
- Best Rocket League Settings
- Best Path of Exile 2 Settings
- Best Rust Settings
- Best Tarkov Settings
- Best R6 Settings
- Best Anti Aliasing Setting
- MW4 Settings Generator
- MW4 Sensitivity Converter
- Gears of War: E-Day PC Settings Optimizer
- GTA 6 TV Settings Generator
- Eden Emulator Settings Finder
- Best Eden NX2 Settings and Turnip Drivers
Axee Davies is the founder of AxeeTech, publishing gaming guides, codes, and Windows how-tos since March 2013. A tech enthusiast for 13+ years — starting with smartphones and Android rooting — he now runs a site that puts out a new guide every day for Roblox players, traders, and Windows users. More about AxeeTech
More Games You May Like
How to Get the Frost Relic in Sailor Piece (Roblox 2026 Guide)
Crane in Steal An Egg: How to Get It and Use It
Best Path of Exile 2 Settings: Free Generator for FPS, Renderer and Upscaling (2026 Guide)
Best Rocket League Settings: Free Generator for Camera, Controller and Video (2026 Pro Values)
Zero Sum Clean Kill Calculator: Free Number Solver and 7 Best Operator Tips (Steam, 2026)
AION 2 Maintenance Time Converter: Free Server Downtime and Best Ludra Check-In Deadline Tool (Nov 17)
Colab Drive Mount Fix Generator: Free Code for “Credential Propagation Was Unsuccessful” and 4 Best Alternatives
SteamOS 3.10.1 Preview Update Checker: Free Forza Horizon Fix and Best Invalid Signal Steps (2026)