How to Fix FPS Drops: Free Diagnoser Finds the Cause in 7 Answers (CPU, GPU, Heat or Windows)

If you want to know how to fix FPS drops, the first job is finding which part of the PC causes them. This free diagnoser does that. Answer seven short questions about when the drops happen and what your hardware shows, and it names the most likely cause and gives you the fixes in the order that saves the most time.

An FPS drop is a sudden fall in frame rate, for example from 120 to 45 for a second or two. It has ten common causes, and each one needs a different fix. Lowering graphics settings cures only one of them. The guide below explains how to read GPU usage and temperature, then walks through every cause step by step for Windows 11 and Windows 10, on desktops, laptops and handhelds.

FPS drop fixer for PC games
How to fix FPS drops: find the cause first, then apply the matching fix.

How to Fix FPS Drops With the Diagnoser

The diagnoser above is the fastest way to learn how to fix FPS drops on your own PC, because it narrows ten possible causes down to one. Each answer rules causes in or out.

  1. When it drops. The timing is the strongest clue. Drops that begin after 20 minutes point to heat. Drops only in busy scenes point to the processor.
  2. GPU usage. At 95 to 100 percent the graphics card is the limit. Below 90 percent something else is holding it back.
  3. Temperature. Anything over 90 C overrides every other answer, because a throttling chip explains all other symptoms.
  4. Device. Laptops and handhelds add power limits that desktops do not have.
  5. RAM, VRAM and drive. These decide whether short hitches come from memory or from storage.

If you have not checked GPU usage or temperature, leave those answers on “I have not checked”. The tool still gives a result, and it tells you which reading to take first.

How to fix FPS drops chart of causes by symptom
Each FPS drop pattern points to a different cause.

FPS Drops, Low FPS, Stutter and Lag: Which One Do You Have?

People use these four words for the same feeling, but they are different faults. Knowing how to fix FPS drops starts with being sure a drop is what you have.

ProblemWhat you seeFrame rate counterUsual cause
FPS dropSmooth play, then a slow patch lasting secondsFalls sharply, then recoversHeat, CPU limit in busy scenes, full VRAM
Low FPSThe game is slow all the timeLow and steadySettings too high for the GPU, power saving
StutterTiny freezes, a fraction of a second eachLooks normal, the picture hitchesShader compilation, RAM, slow drive
LagPlayers teleport, hits register lateNormal and steadyNetwork: ping or packet loss, not the PC

If your frame rate counter stays high while other players jump around, the problem is your connection. No graphics setting will change it. Game-specific pages such as the Marvel Rivals lag fix cover that case.

Step 1: Read GPU Usage and Temperature

Two numbers decide almost everything. You can read both without installing anything.

  1. Start the game and play until the frame rate falls.
  2. Press Ctrl + Shift + Esc to open Task Manager, then select Performance.
  3. Select GPU. Read the usage graph for the last minute, the Dedicated GPU memory line, and GPU temperature at the bottom.
  4. Select CPU and Memory and note how full each one is.
  5. For a reading inside the game, press Windows + G to open Xbox Game Bar and pin the Performance widget.
Reading while the frame rate is lowWhat it meansGo to
GPU 95 to 100 percentThe graphics card is the limitGPU fixes
GPU below 90 percent, one or more CPU cores fullThe processor is the limitCPU fixes
Dedicated GPU memory at its maximumVideo memory is fullVRAM fixes
Memory above 90 percentSystem RAM is shortRAM fixes
Any temperature over 90 CThermal throttlingHeat fixes
Drive active time at 100 percentStorage cannot keep upDrive fixes
Everything looks idlePower saving, a frame cap or V-SyncWindows fixes

Total CPU usage is misleading. A game that fills two cores of a twelve-core processor shows about 17 percent in total and is still CPU-limited. Low GPU usage is the reliable sign.

How to fix FPS drops chart for reading Task Manager
What each Task Manager reading means.

How to Fix FPS Drops Caused by Heat

Heat is the most common answer to how to fix FPS drops that appear after a while. When a chip reaches its limit it lowers its own speed to survive, and the frame rate falls with it. The pattern is always the same: fine for the first 15 minutes, then worse.

Temperature under load: what is normal

Approximate ranges for current desktop and laptop parts

Under 70 CCool
70 to 80 CNormal
80 to 90 CWarm, watch it
90 to 95 CLimit for many chips
95 to 100 CThrottling
  1. Watch temperatures while you play. Press Ctrl + Shift + Esc, open Performance, and select GPU to see GPU temperature. Use your motherboard or laptop maker’s own utility for the CPU.
  2. Clean the dust from intake fans, heatsinks and filters with compressed air. Hold each fan still while you blow.
  3. Give the PC room: at least 10 cm behind a desktop, and a hard flat surface under a laptop. Never play on a bed or sofa.
  4. Set a more aggressive fan curve in the BIOS or the maker’s utility, so fans reach full speed by 80 C.
  5. Cap the frame rate to your monitor’s refresh rate. A capped GPU runs cooler and holds its speed.
  6. If a desktop CPU still passes 90 C, replace the thermal paste and check that the cooler is seated flat.
  7. On a laptop older than three years, a paste and pad replacement by a repair shop usually brings back the lost performance.

Exact limits differ by part. Many current processors are built to run at up to 95 or 100 C under full load and will throttle there, and most graphics cards begin to slow somewhere between 83 and 90 C. Check the specification page for your own model if you want the precise figure.

How to Fix FPS Drops From a CPU Bottleneck

A CPU bottleneck is the usual reason for drops in fights, cities and large multiplayer matches. The graphics card has spare capacity, but the processor cannot hand it frames fast enough.

  1. Confirm it: GPU usage well under 90 percent while the frame rate is low means the CPU is the limit.
  2. Close the browser, launchers you are not using, RGB software and anything else with a tray icon.
  3. Lower the settings that load the CPU: view or draw distance, crowd and traffic density, physics, shadows distance and ray tracing.
  4. Do not lower resolution or the upscaler. That moves more work to the CPU and changes nothing.
  5. Enter the BIOS and turn on the memory profile, shown as XMP, EXPO or DOCP. RAM running at its default speed can cost 10 to 20 percent in CPU-limited games.
  6. Set Windows to Best Performance: Settings, System, Power and battery, Power Mode.
  7. Cap the frame rate a little below what the CPU can hold. A steady 90 feels better than 120 with drops to 70.
Setting typeLoads the CPULoads the GPULower it for a CPU limit?
View or draw distanceHighMediumYes
Crowd, traffic and NPC densityHighLowYes
Physics and destructionHighLowYes
Shadow distance and cascadesMediumMediumYes
Ray tracingMediumVery highYes
ResolutionNoneVery highNo
Upscaler modeNoneHighNo
Texture QualityNoneLow, uses VRAMNo
Anti-aliasing and post-processingNoneMediumNo

The memory profile step matters more than people expect. New RAM runs at a slow default speed until the profile is turned on in the BIOS, and many PCs have never had it enabled.

How to Fix FPS Drops From the GPU or Full VRAM

When the graphics card sits at 95 to 100 percent, it is doing all it can. The fix is to ask for less, in the order that costs the least picture quality.

  1. Confirm it: GPU usage at 95 to 100 percent with a low frame rate means the graphics card is the limit.
  2. Turn on an upscaler: DLSS, FSR or XeSS at Quality. This is the largest single gain in most games.
  3. Turn ray tracing off, or to its lowest level.
  4. Lower shadows, volumetric fog and clouds, reflections and ambient occlusion by one step each.
  5. Lower resolution only as a last step. Upscaling gives the same gain with a sharper picture.
  6. Update the graphics driver from the maker’s own app or site.
  7. Cap the frame rate just below the lowest value you see in busy scenes, so drops stop being visible.

When video memory is full

A full VRAM buffer feels different from a slow GPU. The frame rate is fine, then collapses for a moment when you turn quickly or enter a new area, because textures are being swapped.

  1. Confirm it: in Task Manager, Performance, GPU, look at Dedicated GPU memory. If it sits at the top of its range, VRAM is full.
  2. Lower Texture Quality by one step. This setting uses memory and almost no GPU power, so the picture loses little.
  3. Turn off ray tracing and frame generation. Both need extra video memory.
  4. Lower the output resolution or use a stronger upscaler mode.
  5. Close the browser and any app with video playing. They hold video memory too.
  6. Restart the game after changing textures. Many games only free the memory on restart.
VRAMComfortable resolution in recent gamesTexture QualityRay tracing
4 GB1080pLow to MediumOff
6 GB1080pMediumOff
8 GB1080p, some 1440pHighLow, with care
12 GB1440pHigh or UltraOn
16 GB or more1440p and 4KUltraOn

These are general guides. Demanding releases can need a step more, and older or competitive games need far less.

How to fix FPS drops chart of GPU and VRAM settings
Settings to lower first when the graphics card is the limit.

Windows Settings That Stop FPS Drops

Windows 11 and Windows 10 have a handful of settings that affect games. Set them once.

SettingWhereSet toWhy
Game ModeSettings, Gaming, Game ModeOnStops Windows Update and driver installs from interrupting play
Power ModeSettings, System, Power and batteryBest PerformanceLets the CPU reach full speed
Record what happenedSettings, Gaming, CapturesOffBackground recording uses the GPU encoder all the time
Graphics preferenceSettings, System, Display, GraphicsHigh performance for the gameMakes a laptop use its dedicated GPU
Startup appsTask Manager, Startup appsDisable what you do not needFrees RAM and CPU time
Variable refresh rateSettings, System, Display, GraphicsOn, with a G-Sync or FreeSync monitorHides small drops
  1. Open Task Manager during a drop and sort by CPU, then GPU, then Disk. Whatever jumps to the top is the cause.
  2. Turn off overlays you do not use: launcher overlays, chat app overlays and recording overlays.
  3. Turn off background recording: Settings, Gaming, Captures, and switch off Record what happened.
  4. If you record or stream, use the graphics card’s hardware encoder, not the CPU encoder, and cap the game’s frame rate.
  5. Pause cloud sync, downloads and antivirus scans while playing. Add the game folder to the antivirus exclusion list.
  6. In browser settings, turn off the option to keep running in the background, and turn off its hardware acceleration if it stays open.

There is no need for “debloat” scripts or registry tweaks. They rarely help frame rate and they often break updates.

How to fix FPS drops chart of Windows settings
Windows settings for a steady frame rate.

Fixing FPS Drops After a Driver, Windows or Game Update

If you are searching for how to fix FPS drops that began on a specific day, an update is the likely cause, and the fix is to undo or repair it.

  1. Note what changed last: graphics driver, Windows update or game patch.
  2. After a game patch, let the game finish compiling shaders, then play two matches before judging. First runs after a patch always stutter.
  3. After a graphics driver update, reinstall it and choose the clean or factory reset installation option.
  4. If the clean install does not help, install the previous driver version from the maker’s site.
  5. After a Windows update, install any newer driver, then check Settings, Windows Update, Update history for a pending fix.
  6. Verify the game files in your launcher. A patch can leave a damaged file behind.
  7. Reset the game’s graphics settings to default, then apply your own again. Patches sometimes change what a setting does.

Shader compilation stutter

Many current games build shaders the first time each effect appears. That causes short hitches for the first hours after an install, a patch or a driver update, and it clears by itself.

  1. If the game offers a shader compilation step on its menu, let it finish before you play. It can take several minutes.
  2. Play the same map or area twice. If the second run is smoother, this is the cause, and it will fade as the cache fills.
  3. Do not clear the shader cache as a routine fix. Clear it only once after a driver update, then let it rebuild.
  4. Move the game to an SSD. Loading stutter is far worse on a hard drive.
  5. Leave 15 percent of the SSD free. A nearly full drive writes slowly.
  6. Cap the frame rate. A capped game has spare time in each frame to absorb a small hitch.

Laptops and Handhelds: Power and Memory

Portable PCs add two causes that desktops do not have: power limits and shared memory.

  1. Plug the laptop or handheld into its own charger. On battery, most gaming laptops cut GPU power by half or more.
  2. Set Windows to Best Performance: Settings, System, Power and battery, Power Mode.
  3. Set the maker’s utility to its Performance or Turbo profile.
  4. Check the game uses the dedicated GPU: Settings, System, Display, Graphics, pick the game, and choose High performance.
  5. Use the original charger. A lower-wattage charger cannot power the GPU fully and the frame rate drops as the battery drains.

When RAM is the limit

  1. Confirm it: in Task Manager, Performance, Memory, check In use against the total. Above 90 percent while playing means RAM is short.
  2. Close the browser before you play. A dozen tabs can hold 2 to 4 GB.
  3. Turn off startup apps: Task Manager, Startup apps, and disable everything you do not need at boot.
  4. Leave the page file on System managed size, on your fastest drive. Do not turn it off.
  5. Lower Texture Quality and crowd density, which use system memory as well as video memory.
  6. If you have 8 GB, moving to 16 GB in two matching sticks is the most effective upgrade you can make for stutter.

When the drive is the limit

  1. Confirm it: in Task Manager, Performance, select the drive. If Active time hits 100 percent during a stutter, the drive is the limit.
  2. Move the game to an SSD. In most launchers this is a Move install folder option and needs no re-download.
  3. Pause downloads and updates while you play.
  4. Keep 15 percent of the drive free.
  5. If you have no SSD, lower Texture Quality and view distance so the game streams less data.

Why a Frame Rate Cap Hides FPS Drops

A frame rate cap is the one fix that helps with every cause. Your eye notices the change in frame time, not the frame rate itself. Falling from 140 to 90 FPS is jarring. Sitting at a steady 90 is not.

Frame time at common frame rates

Milliseconds each frame stays on screen. Lower is smoother

30 FPS33.3 ms
45 FPS22.2 ms
60 FPS16.7 ms
90 FPS11.1 ms
120 FPS8.3 ms
144 FPS6.9 ms
240 FPS4.2 ms

A drop from 120 to 60 FPS doubles the frame time from 8.3 to 16.7 milliseconds, which is why it feels like the game hit a wall. To pick a cap, watch the counter in the busiest scene you play and set the cap about 5 below the lowest number you see. With a variable refresh rate monitor, also cap 3 below the refresh rate so the frame rate stays inside the range.

How to Fix FPS Drops: Worked Example

Here is how to fix FPS drops in a typical case. A player on a three-year-old gaming laptop with 16 GB of RAM gets 110 FPS for the first quarter of an hour, then drops to 50. They pick “Fine at first, worse after 15 to 30 minutes” and “Gaming laptop”, and leave the rest unchecked. The diagnoser returns thermal throttling. Task Manager shows the GPU at 88 C. They clean the vents, raise the back of the laptop, set the fan profile to Performance and cap the game at 90 FPS. The frame rate now holds at 90 for the whole session.

About PC games

Frame rate, measured in frames per second (FPS), is how many images a PC draws each second. It is set by the slowest part of a chain that runs from the processor through system memory to the graphics card and the display.

Microsoft Windows 11 and Windows 10 include Task Manager and Xbox Game Bar, which report CPU, GPU and memory use. NVIDIA GeForce, AMD Radeon and Intel Arc graphics cards offer DLSS, FSR and XeSS upscaling, which raise frame rate by rendering at a lower resolution and rebuilding the image.

The FPS drop fixer on this page is free to use, and we update it when the game changes its numbers.

Official page: Microsoft Support, tips to improve PC performance in Windows.

If this FPS drop fixer helped, these free tools work the same way.

New this month: Marvel Rivals lag fixer, Discord lag fixer, Minecraft server lag calculator, Minecraft recording settings generator.

Frequently Asked Questions

Quick answers about PC games and the FPS drop fixer.

How do I fix FPS drops?

Find the cause first. Check GPU usage and temperature while the frame rate is low. GPU at 95 to 100 percent means lower graphics settings or use an upscaler. GPU under 90 percent means a CPU limit. Over 90 C means heat.

Why does my FPS drop after 20 minutes?

That pattern is thermal throttling. The CPU or GPU reaches its temperature limit and slows down. Clean the dust, improve airflow and cap the frame rate.

Why does my FPS drop in fights?

Fights add players, effects and physics, which load the processor. If GPU usage falls below 90 percent during the drop, the CPU is the limit. Lower view distance, crowd density and effects.

Can low RAM cause FPS drops?

Yes. With 8 GB, Windows moves game data to the drive when memory fills, which causes hitches. Close the browser, or upgrade to 16 GB.

Does lowering resolution fix FPS drops?

Only when the graphics card is the limit. If the processor is the limit, lowering resolution changes nothing.

Why did my FPS drop after a driver update?

A driver update clears the shader cache and can introduce a fault. Let shaders rebuild, then do a clean install of the driver, and roll back to the previous version if it still drops.

Does a frame rate cap help with FPS drops?

Yes. A cap just below your lowest frame rate keeps frame time steady, so drops stop being visible, and it lowers heat.

Is the FPS drop fixer free?

Yes. It runs in your browser and needs no download or sign-up.

More Games You May Like

Leave a Reply

Your email address will not be published. Required fields are marked *