Best Path of Exile 2 Settings: Free Generator for FPS, Renderer and Upscaling (2026 Guide)

The best Path of Exile 2 settings are different for a campaign run on a laptop and an endgame map on a 240 Hz desktop. This free generator builds the graphics profile for your GPU, CPU and resolution: renderer, lighting, global illumination, upscaler, frame cap and the rest.

Path of Exile 2, the action RPG from Grinding Gear Games, is unusual because its frame rate falls hardest exactly when it matters most. A quiet town runs at three times the frame rate of a late map full of monsters, spell effects and loot. That makes the endgame mostly a CPU problem, and it means the usual advice of lowering everything misses the settings that help. The guide below explains each option, how to set it by hand, and how to stop stutter.

best Path of Exile 2 settings generator for Path of Exile 2
The best Path of Exile 2 settings by GPU and CPU.

How to Use the Best Path of Exile 2 Settings Generator

The best Path of Exile 2 settings generator starts from a preset for your graphics card and then moves it up or down a step depending on your priority and your processor. Six inputs decide the result.

  1. Graphics card. Sets the base quality for shadows, lights, water, bloom and textures.
  2. GPU type. Picks the upscaler: DLSS on NVIDIA RTX, FSR on AMD Radeon and GTX cards, XeSS on Intel Arc.
  3. Processor. An older CPU forces lighting to Shadows only, because global illumination loads the CPU in exactly the fights where it is already struggling.
  4. Resolution. Sets the upscaler quality level.
  5. Priority. Endgame FPS drops the preset one tier and removes GI. Visuals raises it one tier.
  6. Refresh rate. Sets the foreground frame cap three frames under your monitor.
Best Path of Exile 2 settings chart by GPU tier
Path of Exile 2 settings by GPU tier.

Best Path of Exile 2 Settings for FPS

If you only change five things, change these. They are the best Path of Exile 2 settings for frame rate because they are the ones that scale with how busy the screen is.

SettingRecommendedLoadWhy it matters
LightingShadowsCPU and GPUGlobal illumination is recalculated as spells and effects light the scene, so its cost climbs in big fights
Number of LightsLow or MediumCPU and GPUEvery skill effect is a light source. Fewer lights means cheaper pack fights
Sun Shadow QualityLow or MediumGPUShadows are costly outdoors and barely visible under effects
Dynamic ResolutionOffFrame pacingIt changes resolution mid-fight, which looks soft and can hitch
Upscale ModeDLSS, FSR or XeSS on QualityGPUFrees GPU time at little visible cost in a top-down camera

Where the frame rate goes in Path of Exile 2

Relative frame rate in the same build, town against a dense endgame map (illustrative)

Town or hideoutHighest
Campaign zoneHigh
Normal mapMedium
Juiced endgame mapLowest

That chart is why benchmarks taken in town mislead. Test in the busiest content you actually play, with a full screen of monsters, before deciding a setting is fine.

DirectX 12 or Vulkan in Path of Exile 2?

Path of Exile 2 offers two renderers, DirectX 12 and Vulkan, and the choice affects stutter more than average frame rate.

RendererUse it whenWatch for
DirectX 12Default choice on Windows with a current NVIDIA, AMD or Intel driverShader compilation hitches on first visit to an area
VulkanDirectX 12 hitches on your system, or you play on Linux or Steam DeckOccasional driver-specific crashes after game patches

Start with DirectX 12. If you see regular hitching after the first few minutes in an area, switch to Vulkan, restart the game and compare in the same map. Neither is faster on every PC, so the best Path of Exile 2 settings here come from a ten-minute test on your own hardware.

Lighting, Shadows and Global Illumination

The Lighting option has two modes. Shadows renders direct light and shadows only. Shadows + Global Illumination adds a second option, Shadow + GI Quality, and turns on global illumination, where light bounces off surfaces and tints the scene. GI is what makes caves glow and spell effects light up walls.

Lighting modeLooksCostBest for
ShadowsFlatter, with clear silhouettesLowestEndgame mapping, older CPUs, high refresh rates
Shadows + Global Illumination, quality LowMost of the atmosphereModerateMid-range and high-end PCs in the campaign
Shadows + Global Illumination, quality HighFull lightingHighestTop-end GPU with an X3D-class CPU

Many players use two profiles: GI on for the campaign and bosses, and Shadows only for mapping. The setting changes without a restart, so switching takes seconds.

Best Path of Exile 2 settings chart of lighting modes
Lighting modes compared.

Best Upscaling Settings: DLSS, FSR and XeSS

Your GPUUpscale Mode1080p1440p4K
NVIDIA RTXDLSSQuality or NativeQualityPerformance
AMD RadeonFSRQuality or NativeQualityPerformance
Intel ArcXeSSQualityQualityPerformance
NVIDIA GTXFSRQualityQualityPerformance

Upscaling renders the game at a lower resolution and rebuilds the image. In a fixed isometric camera the loss is hard to see, so it is close to free performance when the GPU is the limit. It does nothing when the CPU is the limit, which is the usual case in dense maps. If lowering the upscaler quality does not raise your frame rate, your CPU is the bottleneck and the best Path of Exile 2 settings to change are Lighting and Number of Lights.

Internal render resolution at 1440p by upscaler quality

Share of the output pixels the GPU actually renders

Native100%
Quality44% (67% per axis)
Balanced34% (58% per axis)
Performance25% (50% per axis)
Best Path of Exile 2 settings chart of upscaler choices
Which upscaler to use by GPU.

How to Fix Stutter in Path of Exile 2

Stutter and low frame rate are different problems. Low frame rate is steady. Stutter is a smooth game that freezes for a moment. These fixes are in the order to try them.

  1. Let shaders finish. The first run through a new area compiles shaders, and the hitching fades on the second visit.
  2. If hitching continues on DirectX 12, switch Renderer to Vulkan and restart. If it continues on Vulkan, switch back.
  3. Turn Dynamic Resolution off. Constant resolution changes cause their own hitching.
  4. Install the game on an SSD. Asset streaming from a hard drive stalls when new monsters and effects load.
  5. Cap the frame rate a few frames under your monitor’s refresh rate so frame times stay even.
  6. Update the GPU driver, then restart the PC once so the shader cache rebuilds cleanly.
SymptomLikely causeFix
Hitch the first time a skill or monster appearsShader compilationWait it out, or switch renderer
Freezes when entering a new areaSlow storageMove the game to an SSD
Frame rate collapses only in big packsCPU limitLighting to Shadows, fewer lights
Image goes blurry in fightsDynamic ResolutionTurn it off
Stutter after a driver updateStale shader cacheRestart the PC and let it rebuild

How to Change Graphics Settings in Path of Exile 2, Step by Step

  1. Press Escape and open Options.
  2. Select the Graphics tab.
  3. Set Renderer first. A renderer change needs a restart, so do it before the rest.
  4. Set Window Mode to Fullscreen and turn V-Sync and Dynamic Resolution off.
  5. Choose your Upscale Mode and Image Quality.
  6. Set Lighting, then the quality options below it.
  7. Set the Foreground and Background FPS caps.
  8. Open a busy map and check the frame rate with the in-game performance display.

Entering the best Path of Exile 2 settings by hand takes about three minutes. Keep a note of your original values so you can go back.

Best Path of Exile 2 settings chart of stutter fixes
Stutter fixes in order.

Best Path of Exile 2 Settings by Hardware

This table shows the best Path of Exile 2 settings for four common PC classes at the Balanced priority. The generator at the top of the page applies the same values and adjusts them for your processor and resolution.

SettingEntry GPUMid-range GPUHigh-end GPUTop-end GPU
LightingShadowsShadowsShadows + GIShadows + GI
Shadow + GI QualityNot usedNot usedLowHigh
Sun Shadow QualityLowMediumHighHigh
Number of LightsLowMediumHighHigh
BloomLowestLowDefaultDefault
Water Detail LevelLowLowMediumHigh
Texture QualityMediumHighHighHigh
Texture Filtering4x8x16x16x
Upscaler at 1440pQualityQualityQualityNative

Texture Quality barely affects frame rate. It uses graphics memory instead, so set it to High on any card with 8 GB of VRAM or more and only lower it if the game warns about memory or textures load slowly.

Is Your CPU or GPU Limiting Path of Exile 2?

The best Path of Exile 2 settings depend on which part is holding you back, and you can find out in two minutes without installing anything.

  1. Open Task Manager with Ctrl + Shift + Esc and select the Performance tab.
  2. Play the busiest content you normally play for a few minutes.
  3. Alt-Tab back and look at the GPU graph for that period.
  4. If GPU usage sat at 95 percent or more, the graphics card is the limit. Lower resolution, upscaler quality and shadows.
  5. If GPU usage sat well below 90 percent, the processor is the limit. Lower the settings marked CPU in the tables on this page.

In Path of Exile 2 the answer usually changes during play. The graphics card is the limit in quiet zones and the processor takes over in dense packs. That is why an X3D or other large-cache CPU makes more difference to endgame mapping than a faster graphics card, and why Lighting and Number of Lights are the settings to cut first.

Common Path of Exile 2 Settings Mistakes

  • Benchmarking in town. Town frame rates are two or three times higher than map frame rates. Test in a full map.
  • Leaving Dynamic Resolution on. It hides the problem by blurring the picture in fights.
  • Lowering resolution when the CPU is the limit. Nothing changes, and the image just gets worse.
  • Running uncapped. An unlimited frame rate in menus and town heats the GPU for no benefit. Set the foreground cap.
  • No background cap. The game keeps rendering at full speed when you Alt-Tab to a trade site. Set it to 30.
  • Turning Engine Multithreading off. It was a fix for very old CPUs. On anything modern it lowers frame rate.
  • Changing renderer and judging in the first minute. Each renderer rebuilds its shader cache. Give it one full map.

Best Path of Exile 2 Settings Worked Example

A player with an RTX 3060, a modern six-core CPU and a 1440p 144 Hz monitor picks Mid-range, NVIDIA RTX, Balanced. The best Path of Exile 2 settings generator returns DirectX 12, DLSS on Quality, Lighting set to Shadows with GI off, Sun Shadow Quality Medium, Number of Lights Medium, Texture Quality High and a frame cap of 141. Switching the priority to Endgame FPS drops shadows and lights to Low and moves DLSS to Balanced.

About Path of Exile 2

Path of Exile 2 is an action RPG developed and published by Grinding Gear Games, the New Zealand studio behind the original Path of Exile. It entered early access on December 6, 2024 on PC, PlayStation 5 and Xbox Series X and S.

Version 1.0 launches on December 11, 2026, when the game becomes free to play. It adds Acts 5 and 6 to complete the campaign and two new classes, the Duelist and the Shadow. The game is set on the continent of Wraeclast and built around a skill gem system and an endgame of maps on the Atlas.

The best Path of Exile 2 settings generator on this page is free to use, and we update it when the game changes its numbers.

Official page: Path of Exile 2, the official site.

If this best Path of Exile 2 settings generator helped, these free tools work the same way.

New this month: best Rocket League settings generator, best Rust settings generator, best Tarkov settings generator, best R6 settings generator.

Frequently Asked Questions

Quick answers about Path of Exile 2 and the best Path of Exile 2 settings generator.

What are the best Path of Exile 2 settings for FPS?

DirectX 12, Lighting set to Shadows with Global Illumination off, Number of Lights Low or Medium, Dynamic Resolution off, V-Sync off, and DLSS, FSR or XeSS on Quality.

Is DirectX 12 or Vulkan better for Path of Exile 2?

Start with DirectX 12. Switch to Vulkan if you get regular hitching, then compare in the same map. Neither is faster on every PC.

Should I turn off Global Illumination in Path of Exile 2?

For endgame maps, yes. It is the single largest frame-rate gain. Keep it on Low for the campaign if your PC has headroom.

Why does Path of Exile 2 lag in maps but not in town?

Dense maps are limited by the CPU, which has to process monsters, projectiles and light sources. Lowering Lighting and Number of Lights helps more than lowering resolution.

Does DLSS help in Path of Exile 2?

It helps when the GPU is the limit, especially at 1440p and 4K. It does not help when the CPU is the bottleneck.

How do I fix stutter in Path of Exile 2?

Let shaders compile, try the other renderer, turn Dynamic Resolution off, install on an SSD and cap your frame rate just under your refresh rate.

Is the best Path of Exile 2 settings generator free?

Yes. It runs in your browser and needs no sign-up.

More Games You May Like

Leave a Reply

Your email address will not be published. Required fields are marked *